The best Tesla phone mounts for 2026
We've done the research so you don't have to: the best Tesla phone mounts for Model 3 and Model Y, including Juniper and Highland, from fold-away and no-adhesive screen mounts to vent clips and Qi2 chargers.

Dealizard may earn a commission when you buy through links on this page. It never changes the price you pay. We take part in brand programmes on Amazon, including one for the TORRAS Edge in this guide; that doesn't change where it ranks. Prices and ratings were checked on Amazon US and Amazon UK on 18 November 2026 and can change at any time.
We've done the research so you don't have to. Tesla's big centre screen does a lot, but plenty of owners still want their phone in view for a favourite navigation app, messages read aloud, or music. The cabin has no obvious place to put it, so a whole category of Tesla-specific mounts has grown up: magnetic holders that hide behind the screen, clamp onto its edge, clip into the dashboard or hang off the air vent. The catch is fit. The 2024-on Model 3 "Highland" and 2025-on Model Y "Juniper" have different screens, vents and dashboards from older cars, so a mount that's perfect for one can be useless in the other. We don't test products ourselves; we pull together what the expert guides and owners say, then narrow it to mounts you can buy now, with US prices and UK notes where the same mount is sold on Amazon UK.
Our picks at a glance

- Best overall: VICSEED foldable Tesla phone mount, $31.95 (US, third-party). Hides behind the screen and folds away; the most-rated mount here, and 14% under its usual price.
- Best no-adhesive screen mount: TORRAS Edge, $39.99 (US, third-party). Clamps to the screen edge with no glue, 24 N58 magnets, and the cheapest it has been all year.
- Best for Juniper and Highland dashboards: YONZEE magnetic dashboard mount, $35.99 (US, third-party). Clips into the dashboard gap on the newest Model 3 and Model Y.
- Best vent mount: Spigen air vent MagSafe mount, $25.99 (US) / £24.99 (UK). A simple clip-on for Juniper and Highland vents, sold on Amazon US and UK.
- Best if you want charging: Spigen TapLock Qi2, $38.99 (US) / £39.99 (UK). Holds and charges the phone, but owner ratings are mixed.
- Budget pick: UGREEN magnetic Tesla screen mount, $19.99 (US, third-party) / £25.99 (UK, third-party). A well-rated clamp for older Model 3 and Model Y cars, not the Juniper.
How we chose
We don't test products ourselves; we pull together what the experts and owners say. For this guide we read the top-ranking Tesla phone mount guides and hands-on reviews in the US and UK, then checked each mount's listing specs, which cars it says it fits, current price, who's selling it, price history and buyer ratings on Amazon US and Amazon UK.
We looked for:
- Clear fit information for your car's generation, so you don't buy a mount for the wrong screen or vent
- How it attaches: adhesive behind the screen, a clamp, a vent clip or a dashboard clip, and what that means if you lease or sell the car
- A strong magnetic hold for MagSafe iPhones, with metal rings for other phones
- Easy portrait and landscape adjustment without blocking the speedometer or road view
- Charging, where it's built in, and what it needs to work at full speed
- Owner ratings, with a plain warning where they're mixed or the sample is small
MagBak and Jowua appear in several ranking guides as premium charging mounts. We left them out because MagBak isn't sold through our Amazon links and the Jowua charging mounts cost two to three times as much as most mounts here; the Spigen TapLock covers charging for less.
Comparison table
Mount | How it attaches | Fits (per the listing) | Charges the phone | US price | UK price | Amazon rating |
|---|---|---|---|---|---|---|
VICSEED foldable mount | Adhesive pad behind the screen | Model 3, Model Y (incl. Juniper), Cybertruck | No | $31.95, third-party | Not available | 4.4 (6,711) US |
TORRAS Edge | Clamp on the screen edge, no adhesive | Model 3, Y, S, X, Cybertruck screens with a tempered-glass protector | No | $39.99, third-party | Not available | 4.6 (376) US |
YONZEE dashboard mount | Clips into the dashboard gap, no adhesive | 2024+ Model 3 Highland, 2025+ Model Y Juniper | No | $35.99, third-party | — | 4.2 (308) US |
Spigen air vent MagSafe mount | Clips to the front air vent, no adhesive | 2024+ Model 3 Highland, 2025+ Model Y Juniper (not Performance) | No | $25.99 | £24.99 | 4.4 (507) US / 4.5 (496) UK |
Spigen TapLock Qi2 | Clamp on the screen corner, no adhesive | Model 3 (2017+), Model Y 2020–24 and early Juniper; check your screen | Yes, Qi2 up to 15W | $38.99 | £39.99 | 3.5 (308) US / 3.8 (302) UK |
UGREEN screen mount | Clamp on the screen corners, no adhesive | Model 3 and pre-Juniper Model Y | No | $19.99, third-party | £25.99, third-party | 4.4 (1,690) US / 4.4 (1,669) UK |
Best overall: VICSEED foldable Tesla phone mount

$31.95 on Amazon US from a third-party seller when we checked, 14% under the $36.99 it usually sells for. See the latest price
The VICSEED mount sticks to the back of the touchscreen and swings out beside it, so the phone sits roughly level with the screen and you can glance at both together. When you don't need it, it folds back out of sight. It's one of the mounts the expert guides mention most often for owners who want something that looks built in, and it has by far the biggest owner base here.
What you get: the touchscreen mount with 3M adhesive, a magnetic head with 12 N52 magnets, a 360° ball joint for portrait or landscape, two metal rings for phones and cases without MagSafe, an installation frame and an accessories pack. VICSEED says the listing fits the Model 3, Model Y (including Juniper) and Cybertruck.
Worth knowing: owners rate it 4.4 stars from 6,711 ratings on Amazon US. It uses adhesive, and VICSEED asks you to press it on for three minutes and wait six hours before hanging a phone on it, so do it the night before. It doesn't charge the phone. It wasn't available to buy on Amazon UK when we checked. If you like the idea, the TORRAS Stow is a similar fold-away mount with 24 magnets and 3M 4910 adhesive, at $29.69 in the US (well under its 90-day average of about $39.61; 4.4 stars from 1,123 ratings) and £31.60 on Amazon UK from a third-party seller.
Best no-adhesive screen mount: TORRAS Edge

$39.99 on Amazon US from a third-party seller when we checked, the cheapest it has been all year. See the latest price
If you don't want anything stuck to your car, the TORRAS Edge is the screen mount to look at. Instead of an adhesive pad, it clamps onto the edge of the touchscreen with what TORRAS calls a three-point lock: three knobs on the back that you tighten in turn. Silicone padding sits wherever the clamp touches the screen, and you can take it off and move it whenever you like, which suits leased cars and anyone who might sell soon.

The magnetic head uses 24 N58 magnets in a ring, and TORRAS says the mount stayed attached through more than 6,000 cycles of simulated road vibration. A 360° ball joint and an extendable arm let you set the phone in portrait or landscape and move it a little closer to the driver.
What you get: the clamp mount with built-in silicone padding, two metal rings for phones or cases without MagSafe, an accessories pack and a guide. TORRAS backs it with a three-year (36-month) refund or replacement warranty.
Worth knowing: owners rate it 4.6 stars from 376 ratings on Amazon US, the highest score here, though from fewer ratings than the VICSEED. TORRAS lists it for Model 3, Y, S, X and Cybertruck screens, and says it is made to fit Tesla touchscreens with a tempered-glass screen protector, so check your screen before you buy. Because it sits on the screen edge, check it won't cover anything you use on the display. It doesn't charge the phone. At $39.99 it's below its usual price of about $41.37, and it has been as high as $49.99 this year. It wasn't available to buy on Amazon UK when we checked.
Best for Juniper and Highland dashboards: YONZEE magnetic dashboard mount

$35.99 on Amazon US from a third-party seller when we checked. See the latest price
This one is made only for the newest cars: the 2024-on Model 3 Highland and 2025-on Model Y Juniper. A rubber-and-silicone base slides into the gap in the dashboard, with no adhesive, drilling or tools, and a zinc-alloy arm holds a ring of N52 magnets on a 360° ball joint. One hands-on reviewer singled it out for how firmly it stays put with very little vibration, and for how easily it moves from the driver's side to the passenger side.
What you get: the magnetic mount, the silicone base clip, a metal ring for phones without MagSafe, a cleaning wipe and a manual.
Worth knowing: it won't fit older Model 3 or Model Y cars. Owners rate it 4.2 stars from 308 ratings on Amazon US. $35.99 is its usual price, and it has been as low as $27.59 in the past year. We didn't find this model on Amazon UK.
Best vent mount: Spigen air vent MagSafe mount

$25.99 on Amazon US and £24.99 on Amazon UK when we checked. See the latest price
Spigen's mount is shaped for the long front air vent in the Juniper and Highland, so it clips on in seconds with no tools or adhesive and slides along to where you want it. It holds the phone with 20 magnets and swivels for a better angle.
What you get: the vent mount with a soft-touch silicone finish. It works with MagSafe iPhones, Pixel phones with Pixelsnap, and other phones in a MagSafe-compatible case; no metal ring is included.
Worth knowing: Spigen says it fits Juniper and Highland Standard and Premium trims only, not Performance models or older cars, and it should go on the central part of the vent rather than the far ends. Owners rate it 4.4 stars from 507 ratings on Amazon US and 4.5 from 496 on Amazon UK.
Best if you want charging: Spigen TapLock Qi2

$38.99 on Amazon US and £39.99 on Amazon UK when we checked. See the latest price
If your phone is always running navigation and music, a mount that charges saves it from going flat on long drives. The TapLock clamps onto the corner of the touchscreen with a knob, no adhesive, and charges a MagSafe iPhone at up to 15W with Qi2. The arm rotates and locks in 45° steps.
What you get: the TapLock mount with a built-in Qi2 charger and an L-shaped USB-C cable that reaches Tesla's rear USB-C port.
Worth knowing: owner ratings are mixed: 3.5 stars from 308 ratings on Amazon US and 3.8 from 302 on Amazon UK. Fit is specific. The US listing covers Model 3 from 2017, Model Y 2020–2024 and Juniper cars built up to February 2026 with the 15-inch screen, but not later Juniper cars with the 16-inch screen, Model S, Model X or Cybertruck; the UK listing lists slightly different cars, so check your exact model. Full 15W charging needs a 20W or stronger USB-C source, the phone sits beside the screen edge, and Spigen says it may not fit some tempered-glass screen protectors. Android phones need a magnetic case and may charge more slowly.
Budget pick: UGREEN magnetic Tesla screen mount

$19.99 on Amazon US and £25.99 on Amazon UK, both from third-party sellers, when we checked. See the latest price
What you get: a clamp that grips the corners of the centre screen with an adjustable knob and a one-click lock, a triangular support to stop it wobbling, a ring of N52 magnets on a 360° ball joint and an adjustable arm, plus a metal ring for phones without MagSafe. No adhesive, so it comes off cleanly.
Worth knowing: UGREEN says it is not compatible with the Model Y Juniper or Cybertruck, and that it needs a screen with square corners and a back that isn't curved, within a set thickness. It doesn't recommend using it with a screen protector, and it doesn't charge the phone. Owners rate it 4.4 stars from 1,690 ratings on Amazon US and 4.4 from 1,669 on Amazon UK. The US price is a little above its recent average.
How to choose a Tesla phone mount
- Check your car's generation first. The 2024-on Model 3 (Highland) and 2025-on Model Y (Juniper) have different screens, vents and dashboards from older cars. Only buy a mount whose listing names your car and year.
- Check your screen protector. Screen clamps are fussy. Some, like the TORRAS Edge, are made to fit a screen with a tempered-glass protector; others, like the UGREEN, don't recommend one.
- Adhesive or not? Behind-the-screen adhesive mounts look neat and fold away, but they're semi-permanent and need time to cure. Clamps, vent clips and dashboard clips come off cleanly, which suits leased cars.
- Do you need charging? A charging mount adds a cable and needs a strong enough USB-C port. If you mainly use the phone for short trips, a plain magnetic mount plus the car's own phone charger is simpler.
- MagSafe or a metal ring. All of these are magnetic. MagSafe iPhones and MagSafe cases snap straight on; other phones need the included metal ring or a magnetic case.
- Don't block your view. Mount the phone where it doesn't cover the road, the speed readout or anything you use on the screen, and set your route before you drive. In the UK it's illegal to hold or use a phone while driving, and US rules vary by state.
Is it a real deal?
Black Friday is Friday 27 November 2026 and Cyber Monday is Monday 30 November. Car accessories are often discounted around then.
On 18 November, the TORRAS Edge was at its lowest price of the year in the US, the VICSEED was 14% under its usual price, and the TORRAS Stow was well under its 90-day average. The YONZEE was at its usual price, and has been cheaper in the past year.
If you see a "was" price, paste the Amazon link into the Dealizard Deal Checker and it checks the price history for you, then gives you Bad, OK, Good or Great.
FAQs
What is the best phone mount for a Tesla?
It depends on your car and how you want it to attach. Fold-away mounts that stick behind the screen, such as VICSEED's, are the most popular. If you don't want adhesive, a screen clamp such as the TORRAS Edge, a vent clip or a dashboard clip comes off cleanly. If you want the phone to charge as well, choose a Qi2 charging mount.
Do Tesla phone mounts fit the new Model Y Juniper?
Some do and some don't. The 2025-on Model Y Juniper has a different screen, vents and dashboard from earlier cars, so only buy a mount whose listing names the Juniper or 2025-on Model Y. For example, the UGREEN screen clamp doesn't fit the Juniper, while the YONZEE dashboard mount and Spigen vent mount are made for it.
Where is the best place to mount a phone in a Tesla?
Most owners put it beside the centre screen, either behind the screen, on its edge or on the dashboard just next to it, so they can see the phone and the car's own display together. Wherever you put it, it shouldn't block your view of the road, the speed readout or anything you use on the screen.
Will a phone mount damage my Tesla screen?
A well-fitted mount shouldn't. Clamp mounts use silicone pads where they touch the screen, and good adhesive mounts are designed to peel off cleanly. Follow the fitting instructions, check whether the mount is meant for use with a screen protector, and don't overtighten a clamp.
Do magnetic phone mounts damage phones?
Not as a rule. MagSafe iPhones are designed to attach to magnets, and magnetic car mounts are widely used without problems. If your phone doesn't have MagSafe, use the included metal ring or a magnetic case, and check your phone maker's advice if you're unsure.
Do I need a MagSafe phone for a Tesla magnetic mount?
No. MagSafe iPhones and MagSafe cases attach straight away, but most mounts come with a metal ring you can stick to the back of any phone or case so it attaches magnetically.
Is it legal to use a phone mount while driving?
In the UK you can use a phone in a holder for navigation as long as it doesn't block your view, but it's illegal to hold or use the phone while driving, so set your route before you set off. In the US, rules vary by state, and many states ban handheld use.





